Desain UlangTata Letak Pabrik Dengan Metode Systematic Layout Planning (SLP) Di Plant Welding Shop PT. Sanggar Sarana Baja

Putra Ivannah Hakim, Hadhimas Dwi Haryono, Doddy Suanggana

Sari


PT. Sanggar Sarana Baja is a company engaged in the manufacturing process, design, steel fabrication, service, product refurbishing and remanufacturing. The problem at the Plant Welding Shop of PT. Sanggar Sarana Baja is a machine layout that is not organized according to the production flow, which causes the distance between machines that should be close together quite far. This study uses the Systematic Layout Planning (SLP) method which is expected to get the results of a factory layout design that can reduce material handling distances and reduce material handling costs. After processing the data, the proposed layout design 2 is obtained with a displacement moment of 4,527 m / year, while in its initial condition it is 9,355 m / year. The amount of material handling costs was Rp. 5,840,559 / year, while in the initial condition it was Rp. 12,069,457.38 and the savings obtained were 51.61%. Based on the calculations made, the proposed layout design 2 is obtained which can minimize the distance and material handling costs.

Kata Kunci


Cost, Distance, Layout, SLP

Teks Lengkap:

PDF

Referensi


Amri, Meutia, S., & Syuaib, M. (2015). Perancangan ulang tata letak pabrik menggunakan metode systematic layout planning (SLP) pada UD. Indaco Bireun.

Anwar, A., Bakthiar, B., & Nanda, R. (2015). Usulan Perbaikan Tata Letak Pabrik dengan Menggunakan Systematic Layout Planning ( SLP ) di CV . Arasco Bireuen. 4(2), 4–10.

Barnwal, S., & Dharmadhikari, P. (2016). Optimization of Plant Layout Using SLP Method. International Journal of Innovative Research in Science, Engineering and Technology, 5(3), 3008–3015.

Nurhasanah, N., & Simawang, B. P. (2013). Perbaikan Rancangan Tata Letak Lantai Produksi di CV. XYZ. JURNAL Al-AZHAR INDONESIA SERI SAINS DAN TEKNOLOGI, 2(2), 81.

San, G. S., Wahjudi, D., Teknik, D. F., Teknik, J., Universitas, M., & Petra, K. (2000). Analisa Tata Letak Pabrik Untuk Meminimalisasi Material Handling Pada Pabrik Koper. Jurnal Teknik Mesin, 2(1), 41-49–49.

Triagus Setiyawan, D., Hadlirotul Qudsiyyah, D., & Asmaul Mustaniroh, S. (2017). Improvement of Production Facility Layout of Fried Soybean using BLOCPLAN and CORELAP Method (A Case Study in UKM MMM Gading Kulon, Malang). Industria: Jurnal Teknologi Dan Manajemen Agroindustri, 6(1), 51–60.

Umam, M. I. H. (2013). LANTAI PRODUKSI DENGAN MENGGUNAKAN METODE PAIRWISE EXCHANGE DI PT . ALAM PERMATA RIAU.

Winarti, R. Y. (2016). Departemen Upholstery Perusahaan Mebel Menggunakan Algoritma Craft Dengan Minimasi Ongkos Material.


Article Metrics

Sari view : 0 | PDF : 0

Refbacks

  • Saat ini tidak ada refbacks.


Creative Commons License This journal is licensed under a Creative Commons Attribution 4.0 International License