ANALISIS POTENSI BAHAYA KERJA MENGGUNAKAN METODE HAZARD IDENTIFICATION RISK ASSESMENT AND RISK CONTROL (HIRARC) DI PT SUMBER MAS INDAH PLYWOOD

Novita Lisdawanti, Elly Ismiyah, Efta Dhartikasari

Sari


The era of industrial globalization 4.0 implements a computerized production system automatically so that not many workers will operate production machines. Every business activity must have a risk of work accidents. PT. Sumber Mas Indah Plywood is one of the successful companies characterized by export-oriented product income in 5 major countries. With the level of demand that has spread to various countries, the company must always improve the quality of the products produced. The higher the level of productivity of a company, the greater the danger or risk of work that will be posed. The purpose of this study is to conduct an analysis process consisting of hazard identification, risk assessment and risk control using hirarc method. The results showed that there are 3 work stations. In rotary stations there are 4 work activities, at dryer station there are 3 work activities and at repair stations there are 1 work activities. The results of the identification of potential hazards using hirarc method identified there are 10 potential hazards, where there is 1 potential danger including extreme risk level, 6 potential hazards including high risk level, 2 potential hazards including moderate risk level and 1 potential hazard included low risk level.


Kata Kunci


Occupational Accidents, Risk Control, Occupational Hazards, Wood Industr, HIRARC

Teks Lengkap:

PDF

Referensi


Afredo, L. W., & Tarigan, U. P. P. B. (2021). Analisis Resiko Kecelakaan Kerja di CV. Jati Jepara Furniture dengan Metode HIRARC (Hazard Identification Risk Assessment and Risk Control). JURITI PRIMA (Junal Ilmiah Teknik Industri Prima), 4(2), 30–37.

Alfaret, D. (2021). Analisis Resiko Keselamatan Kerja Dengan Metode Hirarc ( Hazard Identification , Risk Assessment , And Risk Control ) di Tambang Bawah Tanah PT . Nusa Alam Lestari , Desa Salak , Kecamatan Talawi , Kota. Jurnal Bina Tambang, 6(4), 1–12.

Alfatiyah, R. (2017). Analisis Manajemen Risiko Keselamatan dan Kesehatan Kerja dengan Menggunakan Metode HIRARC pada Pekerja Seksi Casting. Jurnal Mesin Teknologi (SINTEK Jurnal), 11(2), 88–101.

Australia Standard. (2004). Standard Australia Licence 2004. As/Nzs 4360:2004, 52. http://www.epsonet.eu/mediapool/72/723588/data/2017/AS_NZS_4360-1999_Risk_management.pdf

BPS. (2019). Badan Penyelenggara Jaminan Sosial Ketenagakerjaan. BPS.

Ghika Smarandana, Ade Momon, & Jauhari Arifin. (2021). Penilaian Risiko K3 pada Proses Pabrikasi Menggunakan Metode Hazard Identification, Risk Assessment and Risk Control (HIRARC). Jurnal INTECH Teknik Industri Universitas Serang Raya, 7(1), 56–62. https://doi.org/10.30656/intech.v7i1.2709

Giananta, P., Hutabarat, J., & Soemanto. (2020). Analisa Potensi Bahaya Dan Perbaikan Sistem Keselamatan dan Kesehatan Kerja Menggunakan Metode HIRARC Di PT. Boma Bisma Indra. Jurnal Valtech (Jurnal Mahasiswa Teknik Industri), 3(2), 106–110.

Hartanto. (2018). Hazard Identification Berdasarkan OHSAS 18001:2007 di Universitas X. Tirta, 6(2), 357–362.

HM, G. B. (2021). Analisis Risiko K3 Dengan Pendekatan HIRARC ( Hazard Identification , Risk Assesment And Risk Control ) Pada Bagian Finishing di PT Symgreen. Seminar Nasional Sains Dan Teknologi Terapan IX 2021, ISSN 2685-6875, 420–426.

ILO. (2018). Keselamatan dan Kesehatan Kerja: “Manajemen dan Implementasi K3 di Tempat Kerja. BSI standart publikasi.

Koreawan, O. A., & Basuki, M. (2019). Identifikasi Bahaya Bekerja Dengan Pendekatan Hazard Identification, Risk Assessment And Risk Control (Hirarc) di Pt Prima Alloy Steel Universal. Seminar Nasional Inovasi Dan Aplikasi Teknologi Di Industri, 5(1), 161–165. https://ejournal.itn.ac.id/index.php/seniati/article/view/2213

Mayadilanuari, A. M. (2020). Penggunaan HIRARC dalam Identifikasi Bahaya dan Penilaian Risiko pada Pekerjaan Bongkar Muat. Higeia Journal of Public Health Research and Development, 4(2), 504–512. https://journal.unnes.ac.id/sju/index.php/higeia/article/view/30908/15901

Ramadhan. (2017). Analisis Kesehatan dan Keselamatan Kerja (K3) Menggunakan Metode Hazard Identification Risk Assessment and Risk Control (HIRARC). Prosiding Seminar Nasional Riset Terapan.

Ramdan, F., & Supriyadi. (2017). Identifikasi Bahaya Dan Penilaian Risiko Pada Divisi Boiler Menggunakan Metode Hazard Identification Risk Assessment and Risk Control (Hirarc). Journal of Industrial Hygiene and Occupational Health, 1(2), 161–178. https://doi.org/10.21111/jihoh.v1i1.752

Sari, R. ., Syahputri, K., RIZKIA, L., & Siregar, I. (2017). Identification of Potential Hazard using Hazard Identification and Risk Assessment.

Siska, M. (2018). Analisis 5s dan Hirarc Pada Stasiun Kerja Rotary, Dryer dan Veneer Compouser di PT. Asia Forestama Raya Pekanbaru. Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 4(1), 21. https://doi.org/10.24014/jti.v4i1.6144

Smarandana, G., Momon, A., & Arifin, J. (2021). Penilaian Risiko K3 Pada Proses Pabrikasi Menggunakan Metode Hazard Identification, Risk Assessment And Risk Control (HIRARC). Jurnal INTECH Teknik Industri Universitas Serang Raya, 7(1).

Sumakmur. (2014). Keselamatan Kerja dan Pencegahan Kecelakaan. Toko Gunung Agung.

Tarwaka. (2014). Keselamatan dan Kesehatan Kerja: “Manajemen dan Implementasi K3 di Tempat Kerja. Harapan Press.

Triwati, I. (2021). Manajemen Risiko di PT. Maruki Internasional Indonesia Makassar (HIRARC). Dewantara J. Tech, 02(01), 35–41.




DOI: http://dx.doi.org/10.55445/teknovasi.v8i4.639

Article Metrics

Sari view : 0 | PDF : 0

Refbacks



Creative Commons License This journal is licensed under a Creative Commons Attribution 4.0 International License