ANALISIS KECELAKAAN KERJA MENGGUNAKAN METODE HIRARC (HAZARD IDENTIFICATION, RISK ASSESSMENT DAN RISK CONTROL) DI DIVISI MAINTENANCE CV. DIRA UTAMA SEJAHTERA

Muhammad Adi Purwanto, Akhmad Wasiur Rizqi, Hidayat Hidayat

Sari


Human resources are an important asset in a company and need to be developed. Human resource development is related to the performance generated in achieving the company's targets. The sustainability of human resource performance cannot be separated from work accidents. Many factors often cause work accidents such as: human error, electric shock, etc. This study aims to identify potential hazards, calculate risk level values, analyze the results of risk assessment calculations, and propose controls and solutions to reduce potential hazards and work accidents. The research was conducted in the maintenance division of CV. Dira Utama Sejahtera. It’s a manufacturing company engaged in the field of line pipe. The research was conducted using the Hazard Identification, Risk Assessment, and Risk Control (HIRARC) method. The results showed that there were 9 potential hazards, namely collision on the feet or head, electric shock, falling from the pipeline, pinched between pipelines, chemical explosion, hands hit by hot pipes, splashed by material, hands hit by drill bits, and slipped until the leg is sprained. The results of the risk level assessment that 11,1% fall into the category of low risk and extreme, 33,3% moderate risk, and 44,4% high risk. For risk control, it is proposed by elimination, administrative control, engineering control, and the use of Personal Protective Equipment (PPE).

Keywords  : Work Accidents, Line Pipe Company, HIRARC Method


Kata Kunci


HIRARC

Teks Lengkap:

PDF

Referensi


Afredo, L. W., & Tarigan, U. P. P. B. (2021). Analisis Resiko Kecelakaan Kerja di CV. Jati Jepara Furniture dengan Metode HIRARC (Hazard Identification Risk Assessment and Risk Control). JURITI PRIMA (Junal Ilmiah Teknik Industri Prima), 4(2), 30–37.

Dwisetiono, & Fairussihan, J. D. (2022). Analisis Risiko Keselamatan Dan Kesehatan Kerja ( K3 ) Pada Proses Perbaikan Kapal di PT. Dock Dan Perkapalan Surabaya Menggunakan Metode HIRARC (Hazard Identification, Risk Assessment, And Risk Control). HEXAGON: Jurnal Teknik Dan Sains, 3(1), 10–16.

Fathimahhayati, L. D., Wardana, M. R., & Gumilar, N. A. G. (2019). Analisis Risiko K3 Dengan Metode HIRARC pada Industri Tahu Dan Tempe Kelurahan Selili, Samarinda. Jurnal REKAVASI, 7(1), 62–70.

Giananta, P., Hutabarat, J., & Soemanto. (2020). Analisa Potensi Bahaya Dan Perbaikan Sistem Keselamatan dan Kesehatan Kerja Menggunakan Metode HIRARC Di PT. Boma Bisma Indra. Jurnal Valtech (Jurnal Mahasiswa Teknik Industri), 3(2), 106–110.

Gunawan, A. A., & Bendatu, L. Y. (2015). Perbaikan Keselamatan dan Kesehatan Kerja Dengan Metode HIRARC di PT. Sumber Rubberindo Jaya. Jurnal Titra, 3(2), 421–426. http://publication.petra.ac.id/index.php/teknik-industri/article/view/3528/3198

Ihsan, T., Edwin, T., & Octavianus Irawan, R. (2016). Analisis Risiko K3 Dengan Metode Hirarc Pada Area Produksi PT Cahaya Murni Andalas Permai. Jurnal Kesehatan Masyarakat Andalas, 10(2), 179–185. https://doi.org/10.24893/jkma.v10i2.204

Karundeng, I., Doda, D. V., & Tucunan, A. A. . (2018). Analisis Bahaya Dan Risiko Dengan Metode Hirarc Di Departement Production PT.Samudera Mulia Abadi Mining Contractor Likupang Minahahsa Utara. Jurnal Kesmas, 7(4), 1–7.

Mayadilanuari, A. M. (2020). Penggunaan HIRARC dalam Identifikasi Bahaya dan Penilaian Risiko pada Pekerjaan Bongkar Muat. Higeia Journal of Public Health Research and Development, 4(2), 504–512. https://journal.unnes.ac.id/sju/index.php/higeia/article/view/30908/15901

Saputro, T., & Lombardo, D. (2021). Metode Hazard Identification, Risk Assessment And Determining Control (HIRADC) Dalam Mengendalikan Risiko Di PT. Zae Elang Perkasa. Jurnal Baut Dan Manufaktur, 3(1), 23–29. https://uia.e-journal.id/bautdanmanufaktur/article/download/1316/761/

Standard Australia License. (2004). AS/NZS 4360:2004 Risk managementin Security Risk Analysis, Brisbane: ISMCPI.

Soekiswara, T. E. F. (2020). Faktor Kecelakaan Dan Keselamatan Kerja Pada Penggunaan Crane Di Proyek Konstruksi. Jurnal Menara, 18(2), 42–50.

Srisantyorini, T., & Safitriana, R. (2020). Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja pada Pembangunan Jalan Tol Jakarta-Cikampek 2 Elevated. Jurnal Kedokteran Dan Kesehatan, 16(2), 151–163. https://doi.org/10.37598/tameh.v10i1.127

Susan, E. (2019). Manajemen Sumber Daya Manusia. Jurnal Manajemen Pendidikan, 9(2), 952–962.

Trisaid, S. N. (2020). Analisis Risiko Kecelakaan Kerja Pada Kegiatan Rig Service Menggunakan Metode Hirarc Dengan Pendekatan FTA. Jurnal Ilmiah Teknik Industri, 8(1), 25–33. https://doi.org/10.24912/jitiuntar.v8i1.6343

Triswandana, I. W. G. E. (2020). Penilaian Risiko K3 dengan Metode HIRARC. UKaRsT: Universitas Kadiri Riset Teknik Sipil, 4(1), 97–108. https://doi.org/10.30737/ukarst.v4i1.788




DOI: http://dx.doi.org/10.55445/teknovasi.v9i1.651

Article Metrics

Sari view : 0 | PDF : 0

Refbacks



Creative Commons License This journal is licensed under a Creative Commons Attribution 4.0 International License