ANALISIS PENGENDALIAN KUALITAS PRODUK KARDUS MENGGUNAKAN METODE SIX SIGMA DI CV. AGZ

Mohammad Fachrurrozi Adi, Akhmad Wasiur Rizqi, Deny Andesta

Sari


Quality control is an activity that is used by companies to monitor and evaluate production activities and ensure that production activities meet production process standards. The purpose of this study is to help companies find out the causes of defects and create suggestions for improvement using the six sigma method. The six sigma method is one of the tools used to control quality. By using several stages, namely define, measure, analyze, improvement, control. From data processing and analysis, the total production is 160,800 pcs and the number of defects is 4303 pcs. Based on the results of the calculation of DPMO found as many as 80,280 per one million productions. Based on the Pareto diagram, the percentage of the most dominant types of defects is the type of paint defects that are not neat, so quality improvements are focused on these types of defects using fishbone diagrams.

 

 


Kata Kunci


SIX SIGMA

Teks Lengkap:

PDF

Referensi


Dewi, A. M., & Puspitasari, N. B. (n.d.). ANALISIS PENGENDALIAN KUALITAS MENGGUNAKAN METODE SIX SIGMA PADA PRODUK AMDK 240 ML PT. TIRTA INVESTAMA KLATEN.

Farid, M., Yulius, H., Irsan, I., Susriyati, S., & Maulana, B. (2022). Pengendalian Kualitas Pengolahan Kulit Uptd Kota Padang Panjang Menggunakan Metode Six-Sigma. Jurnal Teknologi Dan Sistem Informasi Bisnis, 4(1), 186–192. https://doi.org/10.47233/jteksis.v4i1.399

Khomah, I., & Siti Rahayu, E. (2015). Aplikasi Peta Kendali p sebagai Pengendalian Kualitas Karet di PTPN IX Batujamus/Kerjoarum. AGRARIS: Journal of Agribusiness and Rural Development Research, 1(1), 12–24. https://doi.org/10.18196/agr.113

Kusumawati, A., & Fitriyeni, L. (2017). Pengendalian Kualitas Proses Pengemasan Gula Dengan Pendekatan Six Sigma. Jurnal Sistem Dan Manajemen Industri, 1, 43–48.

Laricha Salomon, L., dan Nickholaus Denata Limanjaya, A., & Kunci, K. (2015). STRATEGI PENINGKATAN MUTU PART BENING MENGGUNAKAN PENDEKATAN METODE SIX SIGMA (STUDI KASUS: DEPARTMENT INJECTION DI PT. KG). In Jurnal Ilmiah Teknik Industri (Vol. 3, Issue 3).

Laricha Salomon, L., Kosasih, W., & Lilyana Jap, dan. (n.d.). PENINGKATAN KUALITAS BENANG DTY SINGLE 150D/48F PADA MESIN CONE WENDER MENGGUNAKAN METODE SIX SIGMA DAN FACTORIAL DESIGN DI PT. GEMILANG TEXINDOTAMA.

Maulana Ahmad, M. (2019). PENERAPAN METODE SIX SIGMA (DMAIC) PADA UMKM KERUDUNG DI DESA SUKOWATI BUNGAH GRESIK. 5.

Nursyamsi, I., & Momon, A. (2022). Analisa Pengendalian Kualitas Menggunakan Metode Seven Tools untuk Meminimalkan Return Konsumen di PT. XYZ. Serambi Engineering, VII(1).

Pamungkas, I., Tri Irawan, H., & Arkanullah, L. (2018). IMPLEMENTASI STATISTICAL PROCESS CONTROL UNTUK PENGENDALIAN KUALITAS GARAM TRADISIONAL DI KABUPATEN PIDIE. 4.

Rimantho, D., & Mariani, D. M. (2017). Penerapan Metode Six Sigma Pada Pengendalian Kualitas Air Baku Pada Produksi Makanan. Jurnal Ilmiah Teknik Industri, 16(1), 1. https://doi.org/10.23917/jiti.v16i1.2283

Sari, R. A., & Sulaiman, F. (2017). ANALISIS PENINGKATAN KUALITAS PRODUK KERAMIK DENGAN MENGGUNAKAN METODE SIX SIGMA DI CV. GUNUNG MAS MEDAN. In Jurnal Teknovasi (Vol. 04). http://www.iso.org/iso/iso9000-14000/index.html

Shokri, A., Antony, J., Garza-Reyes, J. A., & Upton, M. (2020). Scoping review of the readiness for sustainable implementation of Lean Six Sigma projects in the manufacturing sector. In International Journal of Quality and Reliability Management (Vol. 38, Issue 8, pp. 1747–1770). Emerald Group Holdings Ltd. https://doi.org/10.1108/IJQRM-08-2020-0261

Yadav, V., Gahlot, P., Rathi, R., Yadav, G., Kumar, A., & Kaswan, M. S. (2021). Integral measures and framework for green lean six sigma implementation in manufacturing environment. International Journal of Sustainable Engineering, 14(6), 1319–1331. https://doi.org/10.1080/19397038.2021.1970855




DOI: http://dx.doi.org/10.55445/teknovasi.v9i1.653

Article Metrics

Sari view : 0 | PDF : 0

Refbacks

  • Saat ini tidak ada refbacks.


Creative Commons License This journal is licensed under a Creative Commons Attribution 4.0 International License