ANALISIS RISIKO KESEHATAN DAN KESELAMATAN KERJA (K3) PADA PROSES PEMASANGAN JARINGAN INTERNET FTTH (FIBER TO THE HOME) DENGAN METODE HIRARC (HAZARD IDENTIFICATION, RISK ASSESSMENT, AND RISK CONTROL) STUDI KASUS DI PT. JINDE GRUP INDONESIA

Mohammad Lathoiful Minan, Mohammad Jufriyanto, Hidayat Hidayat

Sari


The industrial sector is one of the fastest growing sectors today. This means that many workers are absorbed in the industrial sector, both the manufacturing industry and the service industry. The workers acts as a driving force for the company to achieve its goals. Every process that goes through to achieve company goals cannot be separated from the risk of work accidents. This study aims to determine the potential risks of K3 through hazard identification, risk assessment, and proposed risk control so as to reduce or minimize work accidents. The research was conducted at PT. Jinde Group Indonesia especially in installation of a new fiber to the home (FTTH) internet network division. PT. Jinde Group Indonesia is a company engaged in internet service providers (ISP) that prioritizes quality and customer satisfaction, especially in the Gresik-East Java area. The method used in this research is HIRARC (Hazard Identification, Risk Assessment, and Risk Control). The results showed that there were 7 work activities with 9 potential hazards, that are falling from the ceiling of the house, being scratched by a cutter, punctured by fiber optics, falling from stairs when tidying fiber cable installations and alternating ties, electrocuted when tidying fiber cable installations and alternating ties, exposed to splintered bricks, and crushed by the foot of the stairs. The results of the risk assessment show that 44,44% of the potential hazards are in the moderate category, 22.22% of low risk, and 33.33% of high risk. The proposed risk controls are engineering control, Personal Protective Equipment (PPE), and administrative control.

 

 

Keywords   : Occupational Health and Safety, HIRARC Method, Internet Network Company


Kata Kunci


Occupational Health and Safety, HIRARC Method, Internet Network Company

Teks Lengkap:

PDF

Referensi


Afredo, L. W., & Tarigan, U. P. P. B. (2021). Analisis Resiko Kecelakaan Kerja di CV. Jati Jepara Furniture dengan Metode HIRARC (Hazard Identification Risk Assessment and Risk Control). JURITI PRIMA (Junal Ilmiah Teknik Industri Prima), 4(2), 30–37.

Ardiansyah, M., Zuhroh, I., & Abdullah, M. F. (2018). Analisis Penyerapan Tenaga Kerja Sektor Industri Pengolahan Tahun 2001-2015 Di Pasuruan Dan Sidoarjo. Jurnal Ilmu Ekonomi, 2(2), 294–308.

Aulia, L., & Hermawanto, A. R. (2020). Analisis Risiko Keselamatan Kerja Pada Bagian Pelayanan Distribusi Listrik Dengan Metode HIRARC (Studi Kasus di PT. Haleyora Power). Sistemik (Jurnal Ilmiah Nasional Bidang Ilmu Teknik), 08(01), 20–24. https://www.sistemik.sttbandung.ac.id/index.php/sistemik/article/view/36

Bernhardin, D., & Ismail, R. S. (2020). Pengaruh Kesehatan Kerja dan Keselamatan Kerja Terhadap Produktivitas Karyawan Pada PT Haleyora Powerindo Bandung. JEMPER (Jurnal Ekonomi Manajemen Perbankan), 2(2), 65–76. https://doi.org/10.32897/jemper.v2i2.376

Dwisetiono, & Fairussihan, J. D. (2022). ANALISIS RISIKO KESELAMATAN DAN KESEHATAN KERJA ( K3 ) PADA PROSES PERBAIKAN KAPAL DI PT . DOCK DAN PERKAPALAN SURABAYA MENGGUNAKAN METODE HIRARC ( HAZARD IDENTIFICATION , RISK ASSESSMENT , AND RISK CONTROL ). HEXAGON: Jurnal Teknik Dan Sains, 3(1), 10–16.

Ernawaty, S., Rachma, N., & Primanto, A. B. (2020). PENGARUH KESEHATAN DAN KESELAMATAN KERJA (K3) DAN DISIPLIN KERJA TERHADAP KINERJA KARYAWAN PT KINO INDONESIA, Tbk CABANG PRIGEN PASURUAN. E-Jurnal Riset Manajemen, 09(16), 40–59.

Fathimahhayati, L. D., Wardana, M. R., & Gumilar, N. A. G. (2019). Analisis Risiko K3 Dengan Metode Hirarc pada Industri Tahu Dan Tempe Kelurahan Selili, Samarinda. Jurnal REKAVASI, 7(1), 62–70.

Giananta, P., Hutabarat, J., & Soemanto. (2020). Analisa Potensi Bahaya Dan Perbaikan Sistem Keselamatan dan Kesehatan Kerja Menggunakan Metode HIRARC Di PT. Boma Bisma Indra. Jurnal Valtech (Jurnal Mahasiswa Teknik Industri), 3(2), 106–110.

Juliatri. (2020). Pengendalian Bahaya Fisik pada Pekerjaan Dokter Gigi. E-GiGi, 8(1), 34–43. https://doi.org/10.35790/eg.8.1.2020.29097

License, S. A. (2004). AS/NZS 4360:2004 Risk Management in Security Risk Analysis. ISMCPI.

Maringka, F., Kawatu, P. A. ., & Punuh, M. I. (2019). Analisis Pelaksanaan Program Kesehatan Dan Keselamatan Kerja Rumah Sakit (K3RS) Di Rumah Sakit Tingkat II Robert Wolter Mongisidi Kota Manado. Jurnal KESMAS, 8(5), 1–10.

Mayadilanuari, A. M. (2020). Penggunaan HIRARC dalam Identifikasi Bahaya dan Penilaian Risiko pada Pekerjaan Bongkar Muat. Higeia Journal of Public Health Research and Development, 4(2), 504–512. https://journal.unnes.ac.id/sju/index.php/higeia/article/view/30908/15901

Ramadhan, F. (2017). Analisis Kesehatan dan Keselamatan Kerja (K3) Menggunakan Metode Hazard Identification Risk Assessment and Risk Control (HIRARC). Seminar Nasional Riset Terapan, 164–169.

Riptifah Tri Handari, S., & Samrotul Qolbi, M. (2021). Faktor-Faktor Kejadian Kecelakaan Kerja pada Pekerja Ketinggian di PT. X Tahun 2019. Jurnal Kedokteran Dan Kesehatan, 17(1), 90–98. https://jurnal.umj.ac.id/index.php/JKK

Sukmandari, E. A., Pramono, T. D., & Subekti, A. T. (2018). Potensi Bahaya Kerja Pada Pekerja Industri Manufaktur Logam. Jurnal Manajemen Kesehatan Yayasan RS. Dr. Soetomo, 4(2), 170–177.

Triswandana, I. W. G. E. (2020). Penilaian Risiko K3 dengan Metode HIRARC. UKaRsT: Universitas Kadiri Riset Teknik Sipil, 4(1), 97–108. https://doi.org/10.30737/ukarst.v4i1.788

Wahid, A., Munir, M., & Hidayatulloh, A. R. (2020). Analisis Resiko Kecelakaan Kerja Menggunakan Metode HIRARC PT. SPI. Journal of Industrial View, 02(02), 45–52.




DOI: http://dx.doi.org/10.55445/teknovasi.v9i1.659

Article Metrics

Sari view : 0 | PDF : 0

Refbacks

  • Saat ini tidak ada refbacks.


Creative Commons License This journal is licensed under a Creative Commons Attribution 4.0 International License